|
Polyurethane Belt Wipers
Solutions for clenaing belts in environments from wet clay to frozen coal
- 60% less coefficient of friction than rubber
- Reduces drag on motor horse power used
- Available in 4", 5", 6", 8", 10" & 12" widths
- Field tested with 8-10 times the wear life over quality ribber wipers
- Longer life wipers translates into lower maintenance and labor savings
- No more, scraps, scrapers are sold by the inch so you only order what you need
- nonporous, will not collect fines or other materials that can damage your belt
Wipers engineered to service your every need!
|
KS02
Our double durometer Belt Wiper
Utilizing an exclusive process, the two layers of the KS02 are chemically bonded,
and will not separate in the harshest of environments. The harder durometer 93A, scrapes
the conveyor belt clean in rugged applications, while the softer durometer 70A, produces
a squeegee effect, removing water and giving the wiper more flexibility. KS02 is available
in thicknesses ranging from 3/4" to 2".
|
KS03
Our triple durometer SuperWiper
Utilizing three chemically bonded layers, the KS03 is designed for use in environments
where a harder polyurethane surface is needed. The KS03 has a softer 70A durometer sandwiched
between two hard 93A durometer pieces of polyurethane. This allows you to have an extremely
tough scraping surface, yet maintain flexibility. This unique design also allows you to turn
the wiper around when worn, giving you the longest wear life of any belt scraper on the market.
KS03 is available in thicknesses ranging from 1" to 2".
|
|
|
KS04
Our ceramic bead WinterWiper
Embedded into the polyurethane are ceramic wear beads in our KS04, giving you absolutely the
toughest wipers available on the market today. This design will break apart any buildup in frozen
environments where plastics and rubber fail to do the job. KS04 is only available in thicknesses
of 1/2", 3/4" and 1"
|
|
