ACCUFLO™ Conveyor Belt Cleaning Systems

   Built To Last   
The Accuflo Eraser™ Conveyor Belt Cleaning System utilizes our exclusive Heavy Duty Raptor™ Profile Blade.  This blade profile is a commanding 7 inches in height providing more available cleaning where required.  The blade is standardly issued in our high performance Kryptane® Green 83A formula.  This material combines excellent cleaning properties coupled with abrasion resistance.  Large blades and abrasion resistance equals longer life.  You'll spend less money on replacement blades and less time installing them.  Our single pin blade attachment also eases installation and may be switched to right hand, left hand, or reverse applications.

   More Bang For Your Buck   
- 7" Tall Heavy Duty Blade
- Quick-Change One Pin Blade
- Perma-Torque Centralized Adjustable Tensioner
- High Performance Kryptane™ Polyurethane
- Extra Heavy Duty Mainframe
- Heavy Duty Anti-Seize Stub Ends
- Lined Easy Mount Mounting Spools
- Heavy Duty Locking Collars
- Cradled Stub End To Mainframe Attacthment
- Self-Relieveing Cartridge Tensioner
- Weld Or Bolt-In Installation

Our Perma-Torque tensioner is an elastomeric unit which is adjustable from 20 foot pounds to 85 foot pounds and may be twisted from 0° to 504° without failure.  The tensioner is internally located within the mainframe and provides its torque to the blade at a more centralized location, which provides consistent even cleaning.  Due to the internal design, the tensioner system does not protrude out either end of the mounting substrate more then 4".  This shallow protrusion design allows for the installation into locations with limited space and keeps catwalks clear of interference.

This system is built heavy duty throughout.  The mainframe is constructed of ¼" wall x 3" x 3" square tube stock and is coupled to galvanized schedule 80 pipe stub ends with three ½" square head set-screws at each end.  The set-screws cradle the stub ends and force them into alignment with the mainframe.  Both stub ends may freely telescope in and out of the mainframe for easy installation.  This heavy frame construction provides chatter-free operation, even blade wear and will not easily bend in mechanical splice distress applications.

Our flanged mounting spools may be welded or bolted into position.  A V-groove is machined into each flange in a cross-hair pattern to make finding center during installation a breeze.  The spools are urethane lined.  This, coupled with our galvanized stub ends creates an anti-seize situation which assures free movement even in the dirtiest application.  The lining also severely dampens noise levels associated with mechanical belt splices.  Both mounting spools provided with a system are manufactured the same so a tensioner may be used on either end or both ends.