|
TCC - High Temperature Conveyor Belting
A Bi-State Rubber Inc. Partner
Application
Belt types TCC are used for transportation of hot, abrasive materials, which are chemically inactive, such as cement clinker, blast furnace clinker, coke, limestone, sinter, slags, foundry sand, etc. with max. material temperature of 410°F.
The TCC cover resists momentary temperatures considerably higher than 410°F, and for isolated pieces peak temperatures of up to 752°F.
|
Construction and Properties
Belt programme with cut edges based on synthetic EP fabrics (polyester/polyamid).
Carcass
The EP carcass provides
• small elongation at highest working tension
• high impact resistance
• not susceptible to humidity and microorganisms
• high resistance against stress on the edges
Cover
The type TCC is a wear and heat resistant cover, which resists a high constant material temerature. Further, it resists momentary peak temperatures of up to 752°F for isolated pieces of material.
|
|
Recommendations for belt constructions.
Other belt constructions are delivered upon request.
p (piw)
max. working tension |
Cover Combination |
Carcass Construction (piw) |
vulcanized
joining | mechanical
joining | | 2 plies | 3 plies | 4 plies | 5 plies |
143 | 115 |
see table concerning
working temperatures |
143 | | | |
230 | 180 | | 230 | | |
285 | 230 | | 285 | 285 | |
360 | 285 | | 360 | 360 | 360 |
460 | 360 | | 460 | 460 | 460 |
571 | | | | 571 | 571 |
714 | | | | | 714 |
|
Technical Data
The cover thickness is graduated according to lump size and temperature of material as follows:
Type |
Lump
Size |
Cover Thickness |
1/8" + 1/32" |
5/32" + 1/16" |
7/32" + 1/16" |
1/4" + 1/16" |
TCC |
< 1"
> 1" |
302°F
320°F |
338°F
356°F |
356°F
392°F |
374°F
410°F |
Ambient temperature max. 158°F, min. -22°F.
Antistatic according to ISO 284.
For pulley diameters, belt weight and belt thickness we refer to the belt selection basis.
| |
Availability
Cover combinations according to requirement and request.
Open or endless lengths.
Max. length is 1313 Feet/roll or according to agreement, however allowances must be made for practical handling possibilities.
Max. carcass strength 913 piw.
Standard widths available up to 60". (Wider constructions on request).
|
|
